A True HPS Killer. This Cost-Effective DE CDM Delivers in Terms of Quality AND Quantity
The LUMii Solar 630w DE CDM utilises a new type of double-ended ceramic discharge metal halide lamp, producing intense full-spectrum light that replicates natural sunlight. It offers HPS-killing yields and delivers superb quality produce, making it a standout lighting fixture for its price bracket. Very highly recommended!
How the LUMii Solar 630w DE CDM Grow Light Works
The double-ended CDM lamps that these fixtures run are true HPS killers! They effectively fuse two 315 watt lamps into one, delivering an incredible light spectrum that mimics the sun while running at a blinding intensity.
Ceramic discharge metal halide lamps are made with a ceramic arc tube instead of typical composites, like quartz. This allows the lamp to operate at higher temperatures. When the ballast ignites the gases within the lamp, the light it emits has a fuller spectrum that increases the growth and vigour. The LUMii Solar 630w CDM Grow Light reflects high levels of light down to your plants and spreads it evenly, thanks to the highly polished dimpled reflector.
To see our full CDM / CMH Grow Light Kits range, click here
Contains
Choose from the following options:
1 x LUMii Solar 630w CDM DE Fixture (no lamps)
About
- Full fixture light - ballast, reflector and a double-ended 630w CDM lamp
- Generates extremely high levels of PAR (photo synthetically active radiation)
- Creates a much broader light spectrum than HPS
- Choose between Gro lamps (for veg) and Pro lamps (for flower)
- Features integrated short circuit protection
- Excellent as both standalone unit and supplemental
- Outputs less heat than standard HPS lighting
- 190cm IEC 'kettle lead' style power cable
How To Use
DE lamps are easy to fit. Just insert them into the lamp holders so that the protruding wires sit either, then twist the lamp holders and push up the slider to secure the lamp in place. You can then hang the unit over the centre of the grow-space at an appropriate height using easy rolls, rope ratchet hangers or jack chain.
Connect the input lead of your reflector to the output lead of the ballast, ensuring the cable is not pulled tight and does not encounter anything hot (e.g. lamp, reflector, ballast).
PLEASE NOTE: The 630w CDM lamps need to be bedded in as follows: on first illumination the lamp needs to be run continuously for a minimum of 15 minutes. This will allow the metals within the lamp to fuse correctly. FAILURE TO DO THIS WILL RESULT IN LAMP FAILURE! If the above is not adhered to, lamp warranty claims will be void.
Warning: When CDM HID (High Intensity Discharge) lamps are switched on they run extremely hot. As with all HID lamps it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular, avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.